M1000 Mag Meter Installation
Bell Flow Systems were recently approach by a customer who
was having a problem with their existing meter installation. The customer had
previously installed a geared flow meter for their application but due to the suspended
particles in the water, the meter kept jamming and causing the meter to cease. This
in turn caused problems further up the line.
The customer’s application was for silty and sandy water
from borehole testing. For the majority of the time, the water was clean but
occasionally there would be silt and sand in the water, and this was where the
issue arose with the existing meter jamming.
For this reason, Bell Flow Systems thought the best option
was to quote an accurate meter with no moving parts. A Badger Meter M1000 mag flow
meter was best suited as it featured no moving parts and would measure the
clean water, and no damage would be caused to the meter by occasional sand or
silt in the water.
The M1000 has an accuracy of ±0.5%, is available with hard
rubber or PTFE liner, wafer, DIN or ANSI flanged connections, Hastelloy C
measuring & empty pipe electrodes as standard, as well as pulse and 4-20mA
outputs.
After fitting the M1000 mag meter, the customer reported
having no more issues with this application!
###
About Bell Flow Systems:
Bell Flow Systems was established in 1997 with the emphasis being firmly placed on the provision of flow measurement solutions to industry. Since that time, Bell Flow Systems and it's sister company Cortex Displays Ltd have adapted and grown to meet new demands and challenges in an ever changing market place. We now build systems, manufacture display instrumentation and supply a range of products to the renewables market and the environmental market.